Thursday, November 25, 2010
PLEASE DO NOT LINK THESE FILES ANYWHERE ELSE!! If you want to share these Custom IPSW files then you can link back to THIS THREAD but do not post direct links to the IPSW files. Thanks!
These CUSTOM IPSW's are ALREADY JAILBROKEN! That's the whole point of having a Custom IPSW is so that it's already Jailbroken and ready to go. DO NOT try to run redsn0w or blackra1n on these after you restore because you will screw up your device and have to start over.
To use these files you must download all three parts of the Custom IPSW file that you want to use. Then use WinRAR to extract them. Just right click on ANY of the RAR files that you download and WinRAR will extract the files leaving you with ONE IPSW file that you will restore with. It doesn't matter if you extract Part 1, Part 2, or Part 3, they will all extract the same way leaving you with just ONE IPSW file.
HOW TO USE
- Download the correct IPSW files from below
- For Windows users open iTunes and hold down the SHIFT key on your keyboard and select RESTORE
- For Mac users open iTunes and hold down the OPTION key on your keyboard and select RESTORE
=======================================================================
#############
~iPhone 3GS~
#############
~SiNfuL iPhone Custom IPSW #1~
- Works for iPhone 3GS
- Not Activated
- 700 MB Root Partition
- Packages Installed
- Cydia
- OpenSSH
- Custom Boot & Restore Logos
This version is NOT-ACTIVATED and is for users who are using their iPhone 3GS on an Official Carrier such as AT&T.
SiNfuL iPhone 3.1.2 Firmware #1 Custom IPSW Part 1
SiNfuL iPhone 3.1.2 Firmware #1 Custom IPSW Part 2
SiNfuL iPhone 3.1.2 Firmware #1 Custom IPSW Part 3
SiNfuL iPhone 3.1.2 Firmware #1 Custom IPSW Part 4
~SiNfuL iPhone Custom IPSW #2~
- Works for iPhone 3GS
- Activated
- 700 MB Root Partition
- Packages Installed
- Cydia
- OpenSSH
- Custom Boot & Restore Logos
This version comes ACTIVATED and is for users who are using their iPhone 3GS on a NON-OFFICIAL CARRIER such as T-Mobile etc. This version will still work for AT&T as well.
After using this to Jailbreak your iPhone 3GS you will still need to install UltraSn0w from the SiNfuL iPhone Repo to unlock your phone if you are on 04.26.08 baseband. If you already updated your baseband to 05.11.07 then you will need to use blacksn0w from the SiNfuL iPhone Repo to unlock your phone.
SiNfuL iPhone 3.1.2 Firmware #2 Custom IPSW Part 1
SiNfuL iPhone 3.1.2 Firmware #2 Custom IPSW Part 2
SiNfuL iPhone 3.1.2 Firmware #2 Custom IPSW Part 3
SiNfuL iPhone 3.1.2 Firmware #2 Custom IPSW Part 4
=======================================================================
#############
~iPhone 3G~
#############
~SiNfuL iPhone Custom IPSW #3~
- Works for iPhone 3G
- Not Activated
- 600 MB Root Partition
- Packages Installed
- Cydia
- OpenSSH
- Custom Boot & Restore Logos
This version is NOT-ACTIVATED and is for users who are using their iPhone 3G on an Official Carrier such as AT&T.
SiNfuL iPhone 3.1.2 Firmware #3 Custom IPSW Part 1
SiNfuL iPhone 3.1.2 Firmware #3 Custom IPSW Part 2
SiNfuL iPhone 3.1.2 Firmware #3 Custom IPSW Part 3
~SiNfuL iPhone Custom IPSW #4~
- Works for iPhone 3G
- Activated
- 600 MB Root Partition
- Packages Installed
- Cydia
- OpenSSH
- Custom Boot & Restore Logos
This version comes ACTIVATED and is for users who are using their iPhone 3G on a NON-OFFICIAL CARRIER such as T-Mobile etc. This version will still work for AT&T as well.
After using this to Jailbreak your iPhone 3GS you will still need to install UltraSn0w from the SiNfuL iPhone Repo to unlock your phone if you are on 04.26.08 baseband. If you already updated your baseband to 05.11.07 then you will need to use blacksn0w from the SiNfuL iPhone Repo to unlock your phone.
SiNfuL iPhone 3.1.2 Firmware #4 Custom IPSW Part 1
SiNfuL iPhone 3.1.2 Firmware #4 Custom IPSW Part 2
SiNfuL iPhone 3.1.2 Firmware #4 Custom IPSW Part 3
=======================================================================
#############
~iPhone 2G~
#############
~SiNfuL iPhone Custom IPSW #5~
- Works for iPhone 2G
- Not Activated
- Unlocked
- 600 MB Root Partition
- Packages Installed
- Cydia
- OpenSSH
- Custom Boot & Restore Logos
This version is NOT ACTIVATED but is UNLOCKED and is for users who are using their iPhone 2G on an Official Carrier such as AT&T. You can also use this with a NON-OFFICIAL Carrier such as T-Mobile but you would first need to ACTIVATE with an Official Carrier SIM CARD first.
SiNfuL iPhone 3.1.2 Firmware #5 Custom IPSW Part 1
SiNfuL iPhone 3.1.2 Firmware #5 Custom IPSW Part 2
SiNfuL iPhone 3.1.2 Firmware #5 Custom IPSW Part 3
~SiNfuL iPhone Custom IPSW #6~
- Works for iPhone 2G
- Activated/Unlocked
- 600 MB Root Partition
- Packages Installed
- Cydia
- OpenSSH
- Custom Boot & Restore Logos
This version comes ACTIVATED & UNLOCKED and is for users who are using their iPhone 2G on a NON-OFFICIAL CARRIER such as T-Mobile etc. This version will still work for AT&T users as well.
SiNfuL iPhone 3.1.2 Firmware #6 Custom IPSW Part 1
SiNfuL iPhone 3.1.2 Firmware #6 Custom IPSW Part 2
SiNfuL iPhone 3.1.2 Firmware #6 Custom IPSW Part 3
=======================================================================
#############
~iPod 2G~
#############
~SiNfuL iPhone Custom IPSW #7~
- Works for iPod 2G
- 600 MB Root Partition
- Packages Installed
- Cydia
- OpenSSH
- Custom Boot & Restore Logos
SiNfuL iPhone 3.1.2 Firmware #7 Custom IPSW Part 1
SiNfuL iPhone 3.1.2 Firmware #7 Custom IPSW Part 2
SiNfuL iPhone 3.1.2 Firmware #7 Custom IPSW Part 3
=======================================================================
Also here are the BOOT and RECOVERY logos that are in these IPSW files.
Games for Iphone
* Meow Meow Happy Fight ($2.99 -> $0.99)
* Piyo Blocks ($1.99 -> $0.99)
* Piyo Blocks 2 ($2.99 -> $0.99)
* Let’s Golf! 2 ($4.99 -> $0.99)
* Hero of Sparta II ($6.99 -> $0.99)
* Uno ($4.99 -> $0.99)
* The Settlers ($4.99 -> $0.99)
* Brothers In Arms 2: Global Front ($4.99 -> $0.99)
* Asphalt 5 ($4.99 -> $0.99)
* Shrek Kart ($4.99 -> $0.99)
* Iron Man 2 ($4.99 -> $0.99)
* NFL 2011 ($4.99 -> $0.99)
* SimCity Deluxe ($2.99 -> $0.99)
* NCAA Football ($4.99 -> $0.99)
* Reckless Racing ($2.99 -> $0.99)
* The Sims 3 Ambitions ($4.99 -> $0.99)
* The Sims 3 World Adventures ($4.99 -> $0.99)
* Risk ($4.99 -> $0.99)
* Need for Speed Shift ($4.99 -> $0.99)
* Need for Speed Undercover ($4.99 -> $0.99)
* Tetris ($2.99 -> $0.99)
* Rock Band ($6.99 -> $4.99)
* The Game of Life Classic Edition ($2.99 -> $0.99)
* Monopoly ($2.99 -> $0.99)
* Monopoly Here & Now: The World Edition ($2.99 -> $0.99)
* Scrabble ($2.99 -> $0.99)
* The Simpsons Arcade ($2.99 -> $0.99)
Games for iPad
* Lion Pride Huge ($4.99 -> $2.99)
* Hero of Sparta II HD ($6.99 -> $0.99)
* The Settlers HD ($9.99 -> $0.99)
* Splinter Cell Conviction HD ($6.99 -> $0.99)
* Let’s Golf! 2 HD ($4.99 -> $0.99)
* Shrek Forever After: The Game HD ($4.99 -> $0.99)
* Shrek Kart HD ($4.99 -> $0.99)
* Brothers In Arms 2: Global Front HD ($4.99 -> $0.99)
* Iron Man 2 for iPad ($4.99 -> $0.99)
* Reckless Racing HD ($4.99 -> $0.99)
* Madden NFL 11 for iPad ($12.99 -> $4.99)
* Yahtzee HD ($4.99 -> $0.99)
* Clue: Secrets & Spies – A Hidden Object Game ($4.99 -> $2.99)
* Mirror’s Edge for iPad ($9.99 -> $4.99)
* Tetris for iPad ($7.99 -> $2.99)
* Scrabble for iPad ($9.99 -> $4.99)
* Meow Meow Happy Fight HD ($2.99 -> $0.99)
PLEASE DO NOT LINK THESE FILES ANYWHERE ELSE!! If you want to share these Custom IPSW files then you can link back to THIS THREAD but do not post direct links to the IPSW files. Thanks!
To use these files you must download all parts of the Custom IPSW file that you want to use. Then use WinRAR to extract them. Just right click on ANY of the RAR files that you download and WinRAR will extract the files leaving you with ONE IPSW file that you will restore with. It doesn't matter if you extract Part 1, Part 2, Part 3 etc etc, they will all extract the same way leaving you with just ONE IPSW file.
Only the following devices are SUPPORTED
Here are some FAQ's & Answers!
Q: Can I use these Custom IPSW's to restore my VIRGIN non-jailbroke iDevice?
A: YES & NO! You cannot just use a Custom IPSW on a virgin iDevice right off. You must use iREB to put your device into a low level Jailbreak+DFU Mode. The reason is because the bootrom has to be PATCHED FIRST before you can use Custom IPSW's. Simply restoring with a Custom IPSW'd does not do this. This is different for MAC users because they can create custom ipsw's right in PwnageTool and then when they are asked if their device has ever been jailbroken before they would select NO in which PwnageTool would then patch their bootrom. For windows users you must use iREB to put your device into Jailbreak+DFU Mode.
iREB 4.0.x-4.1 RC2 - Fix iTunes Errors When Restoring - SiNfuL iPhone
Q: Does this update my baseband?
A: NO! As with all Custom IPSW's I provide they will NOT update you baseband. HOWEVER see next question below for more info.
Q: What if my iPhone 4 is still on 4.0, 4.0.1 or 4.0.2 FW and I want to upgrade to 4.1 but I don't want to upgrade my baseband?
A: You would need to use TinyUmbrella to save your SHSH file for 4.1 FW and then use TinyUmbrella to restore your iPhone 4 with a stock 4.1 IPSW. TinyUmbrella will prevent your baseband from being upgraded however this ONLY APPLIES to the iPhone 4
Q: What if I want to upgrade to the new baseband since I don't have to worry about an unlock?
A:
Windows Users: You will have to restore your phone using a Stock 4.1 IPSW, then use greenpois0n or limera1n to jailbreak, and then you can use Custom IPSW's from this point on.
Mac Users:You will have to restore your phone using a Stock 4.1 IPSW and then use PwnageTool to Create an IPSW and then when PwnageTool asks if your device has been jailbroken before answer NO!
Q: I don't like the Custom Boot/Restore Logos you have provided.
A: That's fine then sounds like you need to make your own Custom IPSW's then 
Baseband Unlock
UNLOCK YOUR IPHONE with ultrasn0w v0.9.3 - SiNfuL iPhone
If your iPhone 4 is still on 4.0, 4.0.1, or 4.0.2 FW and your baseband is still at 01.59.00 then you can use greenpois0n or limera1n to perform the initial Jailbreak on your device. From this point on once you have Jailbroken then you can use Custom IPSW's.
If your iPhone 4 is still on 4.0, 4.0.1, or 4.0.2 FW and your baseband is still at 01.59.00 then you can use PwnageTool to create an IPSW and Jailbreak your device. When PwnageTool asks you if your device has ever been jailbroken before make sure you select NO!
If you have an iPhone 4 that is on 4.0 or 4.0.1 and you Jailbroke using Jailbreakme.com then you may be able to just restore using a Custom IPSW from this thread. If you are unsuccessful and you get an error while restoring you may have to use the other options listed above.
- You first need to Jailbreak your device using greenpois0n or limera1n FIRST! (Jailbreakme.com MIGHT work)
- Once you have done that then you can use Custom IPSW's from this point on.
3.1.2 Users is simple, just Jailbreak using blackra1n or if you are already Jailbroken then you should have no problem upgrading with a Custom IPSW.
3.1.3 Users
- Easiest way I can think would be to find someone who has a MAC or go down to your local Best Buy and use one of their MACS to restore your device using PwnageTool. The reason being is that when you create a Custom IPSW using PwnageTool you are then asked if your device is already Jailbroken. At this point you would want to select NO so that PwnageTool can patch your bootrom to allow Custom IPSW's to be installed. The only way I know of to do this on Windows is to use greenpois0n or limera1n however to use those tools you would have to upgrade to 4.1 FIRST which in this case would NOT be the way to go because doing so would update your baseband preventing your from unlocking.
=========================================================================
HOW TO USE
=======================================================================
#############
~iPhone 4~
#############
~SiNfuL iPhone 4 Custom IPSW #1~
- This version is NOT-ACTIVATED and is for users who are using their iPhone 4 on an Official Carrier such as AT&T.
SiNfuL iPhone 4 4.1 Firmware #1 Custom IPSW Part 1
SiNfuL iPhone 4 4.1 Firmware #1 Custom IPSW Part 2
SiNfuL iPhone 4 4.1 Firmware #1 Custom IPSW Part 3
~SiNfuL iPhone 4 Custom IPSW #2~
- This version comes ACTIVATED and is for users who are using their iPhone 4 on a NON-OFFICIAL CARRIER such as T-Mobile etc. This version will still work for AT&T as well.
- After using this to Jailbreak your iPhone 4 you will still need to install UltraSn0w from the SiNfuL iPhone Repo to unlock your phone.
SiNfuL iPhone 4 4.1 Firmware #2 Custom IPSW Part 1
SiNfuL iPhone 4 4.1 Firmware #2 Custom IPSW Part 2
SiNfuL iPhone 4 4.1 Firmware #2 Custom IPSW Part 3
=======================================================================
#############
~iPhone 3GS~
#############
~SiNfuL iPhone 3GS Custom IPSW #1~
- This version is NOT-ACTIVATED and is for users who are using their iPhone 3GS on an Official Carrier such as AT&T.
SiNfuL iPhone 3GS 4.1 Firmware #1 Custom IPSW Part 1
SiNfuL iPhone 3GS 4.1 Firmware #1 Custom IPSW Part 2
~SiNfuL iPhone 3GS Custom IPSW #2~
- This version comes ACTIVATED and is for users who are using their iPhone 3GS on a NON-OFFICIAL CARRIER such as T-Mobile etc. This version will still work for AT&T as well.
- After using this to Jailbreak your iPhone 3GS you will still need to install UltraSn0w from the SiNfuL iPhone Repo to unlock your phone.
SiNfuL iPhone 3GS 4.1 Firmware #2 Custom IPSW Part 1
SiNfuL iPhone 3GS 4.1 Firmware #2 Custom IPSW Part 2
=======================================================================
#############
~iPhone 3G~
#############
~SiNfuL iPhone 3G Custom IPSW #1~
- This version is NOT-ACTIVATED and is for users who are using their iPhone 3G on an Official Carrier such as AT&T.
- This version DOES NOT come with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED. You can still enable it manually if you would like using other methods.
SiNfuL iPhone 3G 4.1 Firmware #1 Custom IPSW Part 1
SiNfuL iPhone 3G 4.1 Firmware #1 Custom IPSW Part 2
~SiNfuL iPhone 3G Custom IPSW #2~
- This version is NOT-ACTIVATED and is for users who are using their iPhone 3G on an Official Carrier such as AT&T.
- This version comes with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED.
SiNfuL iPhone 3G 4.1 Firmware #2 Custom IPSW Part 1
SiNfuL iPhone 3G 4.1 Firmware #2 Custom IPSW Part 2
~SiNfuL iPhone 3G Custom IPSW #3~
- This version comes ACTIVATED and is for users who are using their iPhone 3G on a NON-OFFICIAL CARRIER such as T-Mobile etc. This version will still work for AT&T as well.
- After using this to Jailbreak your iPhone 3G you will still need to install UltraSn0w from the SiNfuL iPhone Repo to unlock your phone.
- This version DOES NOT come with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED. You can still enable it manually if you would like using other methods.
SiNfuL iPhone 3G 4.1 Firmware #3 Custom IPSW Part 1
SiNfuL iPhone 3G 4.1 Firmware #3 Custom IPSW Part 2
~SiNfuL iPhone 3G Custom IPSW #4~
- This version comes ACTIVATED and is for users who are using their iPhone 3G on a NON-OFFICIAL CARRIER such as T-Mobile etc. This version will still work for AT&T as well.
- After using this to Jailbreak your iPhone 3G you will still need to install UltraSn0w from the SiNfuL iPhone Repo to unlock your phone.
- This version comes with Multitasking, Homescreen Wallpaper, Battery Percentage Indicator ENABLED.
SiNfuL iPhone 3G 4.1 Firmware #4 Custom IPSW Part 1
SiNfuL iPhone 3G 4.1 Firmware #4 Custom IPSW Part 2
=======================================================================
#################
~iPod Touch 4~
#################
~SiNfuL iPhone iPod Touch 4 Custom IPSW #1~
SiNfuL iPhone iPod Touch 4 4.1 Firmware #1 Custom IPSW Part 1
SiNfuL iPhone iPod Touch 4 4.1 Firmware #1 Custom IPSW Part 2
SiNfuL iPhone iPod Touch 4 4.1 Firmware #1 Custom IPSW Part 3
=======================================================================
##################
~iPod Touch 3~
##################
~SiNfuL iPhone iPod Touch 3 Custom IPSW #1~
SiNfuL iPhone iPod Touch 3 4.1 Firmware #1 Custom IPSW Part 1
SiNfuL iPhone iPod Touch 3 4.1 Firmware #1 Custom IPSW Part 2
=======================================================================
##################
~iPad~
##################
~SiNfuL iPhone iPad Custom IPSW #1~
SiNfuL iPhone iPad 3.2.2 Firmware #1 Custom IPSW Part 1
SiNfuL iPhone iPad 3.2.2 Firmware #1 Custom IPSW Part 2
SiNfuL iPhone iPad 3.2.2 Firmware #1 Custom IPSW Part 3
===========================================================================================
Some sad news about the Boot Logos as apparently this version of PwnageTool only allows changing of the boot & recovery logos for the iPhone 3G. I'm assuming this is due to some kinda limitation in the 4.1 FW and NOT PwnageTool itself. 
Here are the BOOT and RECOVERY logos that are used for supported devices.
If you lack enemies, you're not doing something worthwhile!
(-•SiNfulSS•-)
www.SiNfulSS.com
www.SiNfuLRacing.com
www.SiNfuLComputers.com
www.SiNfuLiPhone.com
Posts
